Spring is for Cleaning as TANK MONTH continues on MWF Magazine.  If you have a series of turning and machining centres placed in a limited floor space, you are facing challenges in removing used metalworking fluid from the tanks.  CECOR has seized the problem to create a solution.  This Shark is here to help. Pumping 70 gallons a minute to a maximum capacity of 60 gallons, this vertically design sump machine is your confined space sump sucting solution.  The Shark can even digest chips, sludge, and fine dust particles as well.  It requires 75 to 120 psi pressure for operation.  So if you don't have room to drive the BUSS between your machines, look into the Shark.